RC Car Drift Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drift wheels for RC Cars with 12mm hex couplers. Built for WLToys 144001.
- Ocena
- 4 / 5
- Polubienia
- 30
- Pobrania
- 194
- Wydruki
- 1
- Wyświetlenia
- 1117
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drift wheel that I made for my WLToys 144001. I wanted to be able to drift around on carpet or concrete and these wheels make it happen. They should fit any RC car or truck with a 12mm hex coupler and a 3mm shaft.
NOTE: I have included a test print to check your machines tolerances. The model is sized at 4mm for the shaft hole and 12.3mm for the hex adapter. I strongly suggest printing the test print first to make sure it will fit your car and adjust your settings before printing the wheel.
Printing Instructions: This model should not need supports. I printed in Polymaker PLA+ and it is holding up on outdoor roads. I would print with 3-4+ perimeters for durability.