1 / 3
DJI RC-N1 mount adapter with QuadLock receiver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DJI RC-N1 mount adapter with QuadLock receiver
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 184
- Makes
- 0
- Views
- 1,281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DJI RC-N1 mount adapter with QuadLock receiver.
Use four M4x5 screws and M4x3 nuts to mount the two together.
Print with PET-G, 0.2mm layer, 0.4mm nozzle, 50% infill.
Use supports for the QuadLock receiver part - print it flat on the bed.
Print the RC-N1 mount on the side (it can usually be printed without supports - but your mileage may vary).