Flower pot with integral pole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flower pot for tall plant with self centering tray and integral pole.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The flower pot for a tall plant with self centering tray and integral pole. The hole for pole has 13.3 mm diameter for wooden pole ~13 mm diameter.
Print settings (pot / tray):
- Layer height: 0.2 mm
- Perimeters: 5
- Extrusion Multiplier: 1.03
- Supports: No
- Material: Prusament PETG
- Nozzle temperature 250°C / 255°C (first layer / other layers)
The pot and tray models are quite big and printing them with layer height 0.2mm results in long print. To be on safe side I used some recomentadions from Watertight prints. The tray was printed with extrusion multiplier 1.1, but next time I would use 1.03. Extrusion multiplier 1.1 seams be to much, the surface has signs of overextrusion. The pot was printed with extrusion multiplier 1.03 - the surface looks nice. Both models: pot and tray have "mouse ears" to prevent detaching of print from the print bed - to be removed from finished print. "Mouse ears" are added as result of printing of the tray where one edge slightly went up (the print ended successfully and is in use).