Flower pot with integral pole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flower pot for tall plant with self centering tray and integral pole.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The flower pot for a tall plant with self centering tray and integral pole. The hole for pole has 13.3 mm diameter for wooden pole ~13 mm diameter.
Print settings (pot / tray):
- Layer height: 0.2 mm
- Perimeters: 5
- Extrusion Multiplier: 1.03
- Supports: No
- Material: Prusament PETG
- Nozzle temperature 250°C / 255°C (first layer / other layers)
The pot and tray models are quite big and printing them with layer height 0.2mm results in long print. To be on safe side I used some recomentadions from Watertight prints. The tray was printed with extrusion multiplier 1.1, but next time I would use 1.03. Extrusion multiplier 1.1 seams be to much, the surface has signs of overextrusion. The pot was printed with extrusion multiplier 1.03 - the surface looks nice. Both models: pot and tray have "mouse ears" to prevent detaching of print from the print bed - to be removed from finished print. "Mouse ears" are added as result of printing of the tray where one edge slightly went up (the print ended successfully and is in use).