23mm Control Horn
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
23mm high control horn for RC airplane
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 112
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made some minor adjustments to the design - use V2 file to get the newest one.
___________________________
This is a control horn, 23mm high that is suitable for modern F3A competition models. It is designed to be used with bearing or ball style links with a 2mm bolt.
I recommend printing with a 0.6mm nozzle, 0.3mm layer height, no supports and no brim. Orientation is shown in the photos, this is critical to ensure the layer orientation is correct for better strength.
Materials - I recommend ASA, ABS, PC, Nylon etc.
Use standard flanged servo screws to mount to a 1/8" plywood base that is glued into the surface of the model.
To get the right side, just mirror the model in your slicer.