Green Fossilized Incut Pinch Climbing Hold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An incut pinch climbing hold for any angle of wall
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 511
- Makes
- 0
- Views
- 1,536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An incut pinch climbing hold for any type of wall
Inspired by a hold my friend really likes at the climbing gym I go to
11/17/23 I just listed my pack of 12 climbing holds on cgtrader and Cults3D for a very reasonable price. I have created all of these holds myself and I think they are very unique and offer great versatility for your home climbing wall! Enjoy this free hold as a sample of my work 😃
Here is the link to the pack:
https://www.cgtrader.com/3d-print-models/hobby-diy/other/star-pack-climbing-holds https://cults3d.com/en/3d-model/tool/star-pack-climbing-holds
Mounting information:
3/8-16 bolt hole with 3/8 washer (3/4 OD washer)
No. 10 screw for the screw holes
Print with Cura's fuzzy skin experimental setting for texture, fuzzy skin settings used:
Fuzzy skin thickness: 0.3 (mm)
Fuzzy skin density = 6.0 (1/mm)
Fuzzy skin Point Distance = 0.1667 (mm)
Infill should be at least 30%, with at least 4 to 5 walls
I only weigh about 145 pounds and I've never had a hold break on me but be responsible and don't skimp out on material and print with more infill/walls for a stronger hold
Enjoy and let me know if there are any particular holds you want designed for your home walls! Also leave a comment if you need a version with different mounting holes, I will quickly add another STL file with custom bolt holes and screw holes if you need it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
=30
Filament: OVERTURE PLA Matte Green
Notes:
Printed at an angle to be able to fit on a 220x220mm print bed
Also matte filaments add a tad more frictionHow I Designed This
Finishing holds
Usually for my holds I just quickly hit the surface that you will hold with low grit sandpaper. Not much but just to add a little more texture on top of the fuzzy skin. And then I generously chalk the hold up.
Category: Sport & Outdoors