Mount for Neff Twistpad (or Similar) Stove Control Knob (Parameterized)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to keep the twistpad control knob for Neff stoves easily accessible.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 1
- Views
- 201
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I wanted to make sure that I can always easily access my Twistpad and not lose it (since these things are very expensive…), so I designed this little mount and stuck it on the inside of the drawer just under the stove.
I have a Twistpad fire and I don't know if the other models have different dimensions. Also some other brands have similar knobs, so there is an OpenSCAD file included to generate an stl with the correct dimensions. The following parameters can be adjusted:
- The diameter of the slot
- The thickness of the slot
- The wall thickness
Make sure to add some tolerances to the dimensions of your twistpad to make sure it easily slides in and out.
Printing Instructions
print upright, no supports, but a little brim may be helpful.