1 / 1
Spacers for Google Nest Doorbell 2nd Generation (Wired)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printable Spacers for mounting the Google Nest Doorbell, 2nd Gen, Wired. Comes in 5mm->55 mm Thicknesses, 5mm steps.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 270
- Makes
- 3
- Views
- 1,387
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd Generation, wired version at various distances.
Be aware, you may need longer screws to use the spacer. I used 3 inch screws for the 55mm spacer. I printed the model in ASA with 0.02 mm layer height, 3 wall loops, and 15% Cubic Infill.