LG OLED TV C2 42" Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Riser for LG C2 42"
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 298
- Makes
- 0
- Views
- 1,863
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
This model is a very simple riser for LG OLED C2 42" so that you can place soundbar below it :)
It is 60mm high and rises the TV by 40mm. It is very stable thanks to 20mm deep slot for the TV legs. I tried to rock the TV, but it did not wobble a bit.
Printing
- 40% infill
- 5 perimeter walls
- 4 top layers
- 4 bottom layers
I would advise sticking some rubber or silicone pad that covers whole bottom of the riser, so that TV won't slide easily. I would avoid using multiple smaller pads as they could introduce some instability, unless they are flat and will create uniform surface.
Editing
This model can be edited in Onshape: https://cad.onshape.com/documents/3ea4ee036a6c860a26d647be/w/bbfa7cd929773b708ac262c2/e/828c993901370e122aa83705?renderMode=0&uiState=655a894b4b12c8363cb73fe0
If you want to make the riser even higher I would seriously consider adding horizontal feet at the ends.