X-Motor Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strain relief for the x-axis stepper motor or any other motor. Updated files for a bit more clearance.
- Rating
- 4.8 / 5
- Likes
- 23
- Downloads
- 145
- Makes
- 4
- Views
- 1,166
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Simple strain relief that is quick to print. The clip slides into the bracket and is trapped when attached to the motor with a zip-tie. The clearances are designed so that the fit keys into the layer ridges so the clip will have a "zipping" sound when installed. Make sure to fully seat the clip. There should be a slight offset at the base of the clip to compensate for the rectangular cable housing on the motor.
Print with the recommended Prusa printer parts settings.
Files have been updated for a bit more clearance between clip and adapter.