1 / 4
SPARKY: Micro Servo Mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamping mounts to attach micro servos to a robot. Two versions: horizontal & vertical axle orientation.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Two micro servo mounts:
- One with a horizontal axle orientation
- One with a vertical axle orientation
Secure micro servo to mount with one M3x10mm screw & nut. Secure servo mount to robot with 2 M3x10mm screws and M3 nuts.
Mounting holes are 3mm diameter with 20mm spacing.
Additional Materials:
- Micro servo
- 3x M3x10mm screws (per mount)
- 3x M3 nuts
Required tools:
- 2.5mm hex driver and 5.5mm nut driver for M3 screws and nuts
Slicer Settings:
Models are printed on a Bambu X1C using PLA with 0.20mm layer height, and no supports.