Apple Airport Socket Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.93 – €6.02 net (excluding VAT)
For file: AirportSocketMount.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.48 excluding VAT (range midpoint).
- Weight reported by the author
- 92 g
- Print time reported by the author
- 4.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a socket mount for the Apple Airport Express/older Apple TV. Can also be adapted for newer Apple TV versions.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This design is meant to hide the Airport cables and allow you to plug it to a socket near an ethernet port.
If the airport case is not tight enough, you can use tack putty / poster putty to give it some adhesion.
The design has a socket mount, a lid and a piece to secure the socket so the does not slid back when you plug it in.
There are also some holes you can use to secure the cables in place.
Tested on a Prusa MK3 with .3mm in Draft mode.