Blazer Ammo Rugged Box Parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rugged box that re-uses Blazer cartridge tray
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 141
- Makes
- 1
- Views
- 1,381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of @Whity Rugged Box (Parametric) https://www.printables.com/model/258431-rugged-box-parametric
This will hold the Blazer cartridge tray from the box, just remove the tray (with cartridges) and plop this in. It's a tight fit so it doesn't move around, I would suggest adding foam to the top so they don't bounce around.
I used 1/8" by 1 1/8" roll pins from Harbor Freight, they don't have enough in their kit, you can pick up a quantity of 250 from McMaster-Carr's website. Take a file to the inside most holes (do not file too much check fit periodically) Slip the pins in with a set of locking jaw pliers. Or use what you want.
No supports needed. Printed on Creality's K1 with PETG.
