Magic the Gathering Deckbox 6-8 EDH/Commander Decks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deckbox for magic the gathering TCG capable of holding up to 8 sleeved 100 card commander decks and accessories
- Rating
- 0 / 5
- Likes
- 89
- Downloads
- 641
- Makes
- 0
- Views
- 7,625
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
A MTG deckbox capable of holding up to 8x 100 card commander decks (sleeved). The last two slots are also designed to hold accessories for play (i.e. tokens, spindowns, dice, etc.).
The model consists of two parts a lid and the body. The hinge requires two pins with an approximate diameter of 1.65-75 mm and depth of 20 mm. I used two tension pins similar to these. To prevent the pins from falling out they were heat set using a soldering iron.
The 3D printed clasp mechanism may not be strong enough to hold the weight of multiple decks when inverted. As such it is not recommended that the box be handled upside-down or from solely the lid.
This work is distributed under a CC-BY-NC license. No commercial use or derivatives are allowed. For commercial licensing please contact the designer.
Tension pins < Amazon Link, but can be found at many local hardware stores