1 / 1
AEG/Rigid 18v Blower Round and Horizontal Nozzles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is an easy to print AEG/Rigid 18v Blower Round and Horizontal Nozzles
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 156
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I designed both the AEG/Rigid 18v Blower Round and Horizontal Nozzles to fit my custom designed and printed blower attachment but they do fit the original extension pipe. They may be a little snug at first but place them on and off a couple of times and they are good to go. My original extension pipe broke the clips off so I designed and printed my own which can be downloaded from the link below.
Custom AEG/Rigid-18v-blower-extension-attachment - 150mm
Printing details
- Printed using 0.4mm nozzle
- 0.20mm layer height (15-20% infill)
- 4 wall loops(min 3)
- Supports needed: Yes ( only minimal supports needed for the inside connector lugs)
(* Using OrcaSlicer-I painted manual supports on bottom of each lug overhang and each of the overhangs where the clip is. I used Snug style support to minimise printing unnecessary waste material. See photos samples) - Filaments: PLA+, PETG or TPU
- Print orientation: Standing upright
Printed using
- Elegoo Neptune 3 Pro & 0.4mm nozzle
- eSUN PLA+ Black
- OrcaSlicer v1.8.0