Saturn 2 power passthrough for heat unit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
power bulkhead for use with Saturn 2 and amazon heating unit.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Basically, I wanted to clean up power delivery to a small heating unit I purchased from Amazon. I was relocating to Denver for the winter and needed to keep my resin warm!
(the heater: https://www.amazon.com/dp/B0BL6WZPM9?psc=1&ref=ppx_yo2ov_dt_b_product_details )
If you happen to have this heater, this will work and directly replace the port on the back of your saturn.
I printed this in PLA+ and it does NOT require heat set inserts with the stock M3 screws on the Saturn 2, however feel free to remix this as you would like. I've gone ahead and included my .step file this go around to make this easier.
Resin people: mix in 30% Siraya tenacious (By weight) with 70% Siraya Fast to make the final product flexible enough to accept a bite from the screws. This is the only current mixture I have tested to work this way, and as a warning it is extremely easy to strip out - I highly recommend FDM or talking to a friend with an FDM if you don't have free access to one.