Banko Piggy Bank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a take on a fun plinko game into a piggy bank.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 665
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
EDIT I missed every other row of pegs spaceing on the previous model. It has now been updated and should be able to fit all regular US coins from a quarter down. Should fit other coins of around 27mm in diameter and smaller.
Here is my Banko Piggy Bank. Drop the coin from the top and watch it make saving fun.
I'm not sure this will print in one piece, it has a .25mm gap. but want you to be able to see it together. The full assembly has a solid bottom if you want to try to print it.
For the bottom, there are two options. One has a 10 mm solid bottom. This is to keep it from falling over. Printed at 100 innfill there is more than enough weight to hold it up. The second option has a hollow bottom to be able to fill with something to weigh it down, like sand or washers. This is again in the hopes of keeping it upright. The top for the hollow part should start printing at 10mm.
Hope y'all like it.