1 / 6
Microphone Arm Cable Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Cable Clip Designed to snap onto a 10x10mm mic arm and a 4mm diameter Cable.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Cable Clip Designed to snap onto a 10x10mm mic arm and a 4mm diameter Cable, It is very easy to install as long as you use the print settings listed below.
For a set of 15 clips you will need ~12g of fillament.
Print Settings:
- 0.2mm layer height
- 2 perimeters
- NO INFILL
Print at this exact settings, I've tried different settings and if you use 3 walls or infill th clip is very hard to install.