Renishaw OMP-60 Probe Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A protective ring to trigger the probe stylus before the probe body can come into contact with a workpiece.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 638
- Makes
- 1
- Views
- 2,306
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Can protect the probe body by triggering contact stylus, probe must be active and in protective mode to react. Won't help if you handwheel the Z at Mach speeds.
Recommended Print Settings:
Seams-Random
Walls-4
Infill-Gyroid ≥35
Support-None
Brim-Outer Only
Materials:
1* M3x5x4 Heat Set Insert (on 15 degree angle to match taper of stylus housing)
1* M3x10 Hex Socket Cap 18-8SS
Print from PET-G or ABS/ASA. Use a 6mm drill bit if needed to open up bore to pass stylus ruby through. Snug set screw to fasten to stylus housing.
Have had 4 mounted in DN VMC's for a couple weeks with no issues during tool changes or probing cycles.