Logitech G Pro X Headset Replacement Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cap between the headband and the ratcheting mechanism. Fits either side.
- Rating
- 4.667 / 5
- Likes
- 34
- Downloads
- 540
- Makes
- 3
- Views
- 1,876
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement cap between the headband and the ratcheting mechanism. I printed in PETG to allow for some flex when adjusting the headset.
If you are missing the original screws you can can use M2 6mm screws.
My headset has 4 holes to hook into, if you have another version with only 2 holes you can snip/break off the pegs that are not required (see below):
Update 2024-04-19
I added a version with M2 heated inserts like these to make the ratchet mechanism more tight and the part more durable. I am not sure if the original screws are M2 (I used M2x6mm screws).