1 / 2
Higher feet bracket (+40mm) for Original Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Higher feet bracket that can allow you to put PSU under the Enclosure.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
I created very quick and simple solution to be able to put PSU under the Enclosure, so I made the feet brackets higher (+40mm).
If you want to “seal” and safer pass through for cables, you can use my other model https://www.printables.com/cs/model/652664-cable-passthrough-for-original-prusa-enclosure
To mount it on the Enclosure you need the same screws, it is just harder to get the nut in, but you don't need to try to find so long screws :-)
Printed with Prusa PETG Galaxy Black 0.2mm STRUCTURAL with 0.4mm Nozzle
