Legholder with Pin-Tool for Ikea Antilop Babychair
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.22 – €1.49 net (excluding VAT)
For file: Improved durability and print reliability / ikea_antilop_leg_holder_04n_02mm_pla_miniis_1h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.35 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.25 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a holder for the legs of IKEA Antilop Babychair with a pin for unclipping the Legs.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 124
- Makes
- 3
- Views
- 459
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clips for transport of the IKEA Antilop Legs. The pin in the middle of the clip is for pushing in the pins of the legs, so you never have to hurt your thumbs again.
I printed it with nobufil petg, which is very strong. If you use other materials you might want to increase the size in z-direction in your slicer, otherwise the ends might snap off.