1 / 2
Legholder with Pin-Tool for Ikea Antilop Babychair — zdjęcie 1
1 / 2

Legholder with Pin-Tool for Ikea Antilop Babychair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a holder for the legs of IKEA Antilop Babychair with a pin for unclipping the Legs.

Ocena
5 / 5
Polubienia
10
Pobrania
123
Wydruki
3
Wyświetlenia
456
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clips for transport of the IKEA Antilop Legs. The pin in the middle of the clip is for pushing in the pins of the legs, so you never have to hurt your thumbs again.

I printed it with nobufil petg, which is very strong. If you use other materials you might want to increase the size in z-direction in your slicer, otherwise the ends might snap off. 

Tagi