Eclipson Cobra FPV Canopy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FPV canopy for the Eclipson Cobra
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
FPV canopy for the Eclipson Cobra.
The canopy 1 file was modified to have a nano FPV camera mount and wire pass-through port.
The canopy 2 file was modified to have a 20x20 VTX mounting-point, an SMA mounting point, and wire pass-through ports for both.
Both canopy files should be printed in LW-PLA and use the settings prescribed by Eclipson.
The remaining files should be printed in PLA with no supports and 15% infill.
You will need m2 screws and nuts to secure everything.
For 20x20 VTXs, just use the m2 spacers (between the VTX and canopy) and directly mount your VTX to the mounting point.
I use the TBS Unify pro32 so I am including a bracket adapter for that as well.
For other VTXs you can use any 20x20 bracket-adapter.
This is a modification of files purchased from Eclipson. If you do not own this model, please support them by purchasing it. They make excellent 3D printed plane designs.
https://www.eclipson-airplanes.com/cobra