Silent wheels for the Prusa IKEA Lack Enclosure Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After having finished the Prusa Lack enclosure from https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 1
- Views
- 558
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
After having finished the Prusa Lack enclosure from https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ (things on https://www.thingiverse.com/thing:2864118) I printed the adjustable spool holder from https://www.thingiverse.com/thing:2867521 which is a really clever idea for the lack enclosure.
But the noise of the spools scratching on the non spinning wheels was a bit annoying. (see video - the original wheel isn't moving)
So I replaced the axles and the wheel by using a ball bearing (8x22x7) with a printed tread and a matching two-part axle.
It fits perfectly into the holder and is really silent.
The treads of the wheels are 9mm wide and have a small lip to center the ball bearing.
just slide in a bearing (usually no need to glue it - but depends on your dimensional accuracy), insert a square nut in the axle part, insert both axle parts in the bearing and screw it together.
maybe consider to sand the tread to make it smooth
Happy silent printing :-)
I used a M3x20 screw with a M3 square nut to assemble the axle.
Category: 3D Printer Accessories