AirGradient DIY case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
4x M3-30 screws + 4 inserts are needed.
https://cnckitchen.store/products/schraube?variant=47867092009295
+
https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs
The connector i used: https://www.aliexpress.com/item/1005005910512284.html
For powering a Buck converter like this: https://www.aliexpress.com/item/32582982343.html should work fine.
(i am using an old power supply from an external hard drive)
I printed some in PLA, some in PETG …
Some pictures show older versions of the case.
On the final you can break out a part to reach the usb port (if you want to power it from usb)
AND dry your filament if wet and use the heat gun only for a short breeze ;-)