1 / 1
Prusa Whistle with Loop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This whistle is the original whistle from Prusa research, with the addition of a loop, and the exclusion of initials.
- Rating
- 4.571 / 5
- Likes
- 20
- Downloads
- 475
- Makes
- 5
- Views
- 1,350
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament: PLA
Infill: 5%
Layer hight: First layer 0.3mm, Remaining layers 0.2mm
Nozzle: 0.4
Nozzles temp: First layer 215c, Remaining layers 210c
Bed temp: First layer 60c, Remaining layers 60c
Supports: no
Print time: Approximately 30 minutes
Filament required: Approximately 1.49m
Works on 6 inch beds
Works on not heated beds, with the inclusion of a 4mm brim