TPA3116D2 Amp Enclosure (V2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
updated to V2 to add additional clearance for audio jacks which were deeper than I guessed. I took jbebels remix of…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 0
- Views
- 696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
updated to V2 to add additional clearance for audio jacks which were deeper than I guessed.
I took jbebels remix of the Customizable Box and added the ability to have a second PCB. I also added in soe extra ventilation to the top panel. I also added a small 30x30x10 24v Fan attached directly to the amp heatsink in the final build to lower the temps a little bit.
The enclosure I want to make is for a TPA3116D2 amp board, but also have a DC-DC boost board in it so I can run the amp a closer to an optimal voltage off a standard DC laptop power supply.
This is designed to fit the following AMP: https://www.amazon.com/dp/B08JG95NXD
and DC Boost board: https://www.amazon.com/dp/B09878FGLR
Print Settings
Printer:
Two Trees Sapphire Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
eSUN PETG
Notes:
I manually changed the panel thickness when exporting the front and back panels to 2.5mm from the default 2 which makes them fit snugly. the default allows a little to much movement for my taste.
Category: Electronics