Creality K1 Left side fIlament guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have created PTFE guides so that you can locate your filament roll on the left side of the K1.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 134
- Makes
- 1
- Views
- 1,843
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I have a cabinet where I keep my Creality K1. My filament holder is kept on the left side of the K1, so I needed to make a way to relocate the PTFE tube to the left side of the cabinet.
I printed with Black PLA, .2mm layer height. Supports are needed.
You will need (4) M3x10 screws. Button head or Socket head will both work. You will also need one or two washers for each screw. (The original screws are M3x8 and are too short.) You will also need to replace the short in-feed PTFE tube with a longer length tube. I'd order a 2M length and cut to fit your needs.