1 / 2
Creality K1 Left side fIlament guide — zdjęcie 1
1 / 2

Creality K1 Left side fIlament guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have created PTFE guides so that you can locate your filament roll on the left side of the K1.

Ocena
5 / 5
Polubienia
32
Pobrania
134
Wydruki
1
Wyświetlenia
1843
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have a cabinet where I keep my Creality K1. My filament holder is kept on the left side of the K1, so I needed to make a way to relocate the PTFE tube to the left side of the cabinet.

I printed with Black PLA, .2mm layer height. Supports are needed.

You will need (4) M3x10 screws. Button head or Socket head will both work.  You will also need one or two washers for each screw. (The original screws are M3x8 and are too short.) You will also need to replace the short in-feed PTFE tube with a longer length tube. I'd order a 2M length and cut to fit your needs.

Tagi