Corner Bed Locator for Anycubic Kobra 2 Max w/ cable management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To help locate the PEI sheet and keep the bed power cable from going under the bed.
- Rating
- 5 / 5
- Likes
- 92
- Downloads
- 833
- Makes
- 1
- Views
- 3,606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
It is not easy to locate the bed on a 420x420 machine. I have designed this locator to fit the Anycubic Kobra 2 Max.
Note: 2 models the difference is the clearance on the side to the gantry/motor. Some machines require a narrow model which is the 2mm version.
I replaced the screws for the cable harness with M3x25mm flat head screws replacing the 16mm long screws. Then I used nuts and washers to attached. Then 2 zip ties to secure the power cable to the bed. I added a 15% lift to the cable to help prevent the cable from getting wrapped under the machine.
Warning: Test mount, make sure the locator clears the motors on the upright of the machine. If the bed is offset to much it will not clear.
Printed from PETG, 6 walls, 25% infill.