1 / 3
Cable Mounting Clip (Druckschelle / Kabelschelle)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable Mounting Clip (Druckschelle / Kabelschelle)
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 382
- Makes
- 0
- Views
- 986
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cable mounting-clip has been designed as an alternative to the expansive ISO equivalents available in all the hardware stores. It contains of two parts:
- The Base (12x23cm): The inner width of 8x16mm is suitable for most screws.
- The Top: Set it on top and click it down until the cable is fixed as tight as you wish.
The cable clamp is usable with wires of max. 12mm diameter. Refering to the outer cable diameter and stiffness it is recommended to print in ABS or PETG.
You can mount this cable clip by screwing (with dowel) or gluing (recommended).
Material: ABS/PETG
Layerheight: 0,2/0,3mm
Infill: 50%