1 / 1
Fujinon W 210mm to Canon EF — image 1

Fujinon W 210mm to Canon EF

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Large format Lens to Canon EF

Rating
0 / 5
Likes
1
Downloads
16
Makes
0
Views
174
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is one of the weirdest things I have done. Still working on Links and will update you soon.
I own a few Large format lenses from 90mm up to 1070mm. Most of the lenses I own would just look ridiculous and absurd on a 35mm/full frame. I figured it was cheaper to build an adapter for some of the focal lengths that I can’t afford on a full frame. Mainly 180,210, and maybe 360. So starting out I made this 210mm for a Fujinon lens.

Print Settings:

100% infill This isn't optional. The walls are just thick enough to keep light out. Print with a Black Filament. Layer height should be 0.2 - 0.1 or better. Smaller layer heights make better flange mounts. You want support to keep the flange fitting without modification. If you want to print with a lighter color then use some "Musou black" or "Black 2.0" or something similar on the inside. A few coats should be enough. It's not a bad idea to paint the inside even when printing with a black filament. The lenses used cast a very large image circle compared with a lens meant for a full-frame camera.

Parts needed:

1x M65 flange

1x M65 to M65 Mount Lens Adjustable Focusing Helicoid

1x Copal 1 to m65

1x 1/4-20 Brass Threaded Heat Set Inserts

8x M3 Thread Heat Set Inserts

4x m3 x 6mm Hex Socket Button Head

4x m3 x 6mm Flat Head Socket Cap Screws Countersunk Bolts

1x Last but not least a Fujinon W 210mm f 5.6 also known as the outside lettering 210 Fujinon.

Tags