Fujinon W 210mm to Canon EF

This is one of the weirdest things I have done. Still working on Links and will update you soon.
I own a few Large format lenses from 90mm up to 1070mm. Most of the lenses I own would just look ridiculous and absurd on a 35mm/full frame. I figured it was cheaper to build an adapter for some of the focal lengths that I can’t afford on a full frame. Mainly 180,210, and maybe 360. So starting out I made this 210mm for a Fujinon lens.

Print Settings:

100% infill This isn't optional. The walls are just thick enough to keep light out. Print with a Black Filament. Layer height should be 0.2 - 0.1 or better. Smaller layer heights make better flange mounts. You want support to keep the flange fitting without modification. If you want to print with a lighter color then use some "Musou black" or "Black 2.0" or something similar on the inside. A few coats should be enough. It's not a bad idea to paint the inside even when printing with a black filament. The lenses used cast a very large image circle compared with a lens meant for a full-frame camera.

Parts needed:

1x M65 flange

1x M65 to M65 Mount Lens Adjustable Focusing Helicoid

1x Copal 1 to m65

1x 1/4-20 Brass Threaded Heat Set Inserts

8x M3 Thread Heat Set Inserts

4x m3 x 6mm Hex Socket Button Head

4x m3 x 6mm Flat Head Socket Cap Screws Countersunk Bolts

1x Last but not least a Fujinon W 210mm f 5.6 also known as the outside lettering 210 Fujinon.