Dovetail Stacking Marker Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dovetail Stacking marker tray for Stampin Up or similar markers. Print as many levels as you need!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 110
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Stacking marker tray with sliding dovetails to lock them together.
Designed for Stampin Up markers, but would fit anything up to about 12mm - 13mm in diameter.
There's an open base included to use as a riser, or you could use a combination of marker and hollow for a unique case.
Print the stacking trays vertical. Depending on your bed adhesion, you may want to include a brim to avoid warping. Print the lid top-down for the best print quality on top.
I printed at .3mm with a .4mm nozzle in PLA and the dovetails are a snug fit, so not necessarily something you would be able to take apart easily. Depending on your printer resolution and print quality, you may need to run a knife or sandpaper along the edges to get a sliding fit that you can move back and forth. I used a combination of deburring tool, Olfa knife and a triangle needle file for clean-up and it only took a few minutes to get a nice sliding fit.
If you print this model, please post a make!
Thanks
Mike