Creality Sprite Extruder Zero Y Offset BLTouch/CRTouch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creality Sprite Extruder Zero Y Offset BLTouch/CRTouch Mount
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 402
- Makes
- 5
- Views
- 2,360
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Should work for both a BLTouch and CRTouch since the mounting holes are the same.
Print oriented with the extruder-side mounting surface on the build plate. Supports are optional depending on how well-adjusted your printer is. I printed at 0.16 layer height, YMMV.
---
2023-12-23 - Version 2: I was getting rattling during high-speed X moves. This should be stiffer while remaining 1.5mm thick at the screw locations.
---
Offsets:
- X 35mm
- Y 0mm
- Z 0mm and tune with Klipper: PROBE_CALIBRATE or Marlin: Z Probe Wizard
Non-printed hardware used:
- 4x M3x8mm socket-head screws
- 2x M3 washers
- 2x M3 nuts
- 1x BLTouch v3.1
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
10% Gyroid
Filament: Overture PETG Black