1 / 2
X-ACTO Blade Disposal Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small box to dispose of dull, old, or otherwise bad X-ACTO blades.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 82
- Makes
- 2
- Views
- 376
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A small box to dispose of old XACTO blades. The slot is large enough to fit #11 and #2 blades. The lid is designed to be semi-permanently snapped on, but it isn't impossible to remove in case the user wants to reuse an old blade.
Assembled Dimensions = 44 mm X 49 mm X 59 mm
Interior Dimensions = 36 mm X 40 mm X 55 mm
Print Settings
- Layer Height = 0.2 mm
- Wall Line Count = 3
- Top/Bottom Thickness = 0.8 mm
- Infill Density = 20%
- No Support
- Both models printed at once
*These are the first and only settings I tried and they worked great. These are simple models and I would imagine that any settings will work fine, just use the settings that tend to work well with your printer.