1 / 2
DeWalt RAS Radial Arm Saw Impellor Motor Fan — image 1
1 / 2

DeWalt RAS Radial Arm Saw Impellor Motor Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement impellor for the electric motor on my DW1251 RAS.

Rating
0 / 5
Likes
12
Downloads
87
Makes
0
Views
561
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I bought a used DeWalt DW1251 Radial Arm Saw a few years ago and noticed that the motor fan had at some point rubbed against the inside of the cowling damaging both but not impeding the saw operation. I got my printer last year and after using Fusion 360 for a while I thought I might give designing a new fan a go.

I designed it in two parts because the original fan extends 15mm from the back which would mean, in my opinion, extra unnecessary support and a longer print time. So I printed the fan flat on the bed with support and a separate 15mm spacer which I glued to the fan once printed even though the fit is nice and snug so probably didn't need the glue. 

I printed it 0.2 with support in PLA with 50% fill.

It has been in use now for several cuts and seems fine. I've included the Fusion and STEP files for you to tweak and improve.

Tags