13,799 models
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…
This model is solid and meant to be printed in “Vase Mode” or “Spiralize Outer Contour.” The model is 7in tall and 5.75in in diameter at the top. The Solidworks model is included if you would like to mess around with it. I recommend…
Update 15.10.2023 New Top - less support required New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of…
Finally, here you see the new Little Grass Drake Articulated, Print in Place, Printable without Supports needed. I printed this model with 100% / 70% / 50% size and it worked fine. I also created a File with separated Eyes. So have fun…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…
Print or use to make new things
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
To empty, simply slide the bin off and leave the clamp attached. Edit 13.08.2026. Added DeskBinClamp_Long.stl for thicker desks. Thank you @Kostek_4999808 for making it!
This is a simple trashbag holder optimised for vase mode. The big one has an inner diameter of 80mm and a inner height of 180mm. The small one is 50mm by 130mm. You can tape it or drill small holes for screws. Both had a wall of 2mm and…
https://www.buymeacoffee.com/augustas Maximize your space and maintain cleanliness with our Compact Trash Bag Holder . Designed for efficiency and convenience, this holder is perfect for those who value a tidy environment. Its…
⇨ Click here for the big version for the Core One L Small bin for trash like purge lines - with positioning aid to prevent bed crashes. I used 4x1.2mm magnets, but you can use the STL with a flat bottom and add your own recesses for…
🗑 Mini Desktop Trash Bin – Vase Mode A stylish mini trash bin for your desk , perfect for a workspace, workshop, or next to your 3D printer. The minimalist design with vertical grooves looks great and is fully optimized for vase (spiral)…
NEW Updated version here: Raspberry Pi 4 Case U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu…
Print or use for making other models
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Clip it on to your doors sidepocket or onto the pocket on the back of your seat! Volume of 2 liters…
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Desk mount trash box Table up to : 20 mm, 30 mm, 40 mm or 50 mm (form IKEA Lack Table) 2 depths : 40 mm or 70 mm (screw_v2 is a little smaller to fit well the holder)
Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…
A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
A trash can to house all of your material waste as you go about printing other things. Print instructions This is a no-support version of the referenced original. It requires some assembly after, but it is quite obvious how it all goes…
I printed the model with ABS 100% Infill, I don't know how durable it is, since I do not intend to hit someone with it. Better Suited for large hands ( I have Glove Size 11) Printed with a Creality K1
Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…
Its the best i could model it, diamensions based on the chips and parts built into the new 5, board based on the old 4
I recommend printing from PETG, but it works even with PLA. Set wall count to 5, then use your favorite settings. If your bin has a large edge or you want stronger clips you can edit Fusion 360 file to fit your needs. Using it, is simpler…
A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.
Removable bin, trash can, or storage for whatever you like, that clips onto the edge of your desk. Simply slides up off the bracket when it's time to be emptied. Following common feedback from people, this is the third version of this…
U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu Components link for all fixing listed above.…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . After a lot…
Majoras Mask HD from The Legend of Zelda printed in different parts
Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…
2025-06-07 - Added case file with no logo Remodelled raspberry pi 4 case from microcenter.com and updated by my liking. More ventilation micro SD card adapter slot Cutout for LEDs Tighter tolerances for tighter fit. Print instructions…
A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…
This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…
U will need: Case - M2.5x10 self tapping screws X8 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 No supports are needed for this design. Red faces can be…
A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
Designer Dovydas Cesna Needed a sturdy little trash can, relatively simple model with a nice pattern on the walls to make it stiffer. total size: 200x200x225mm Settings in PrusaSlicer with 0.4mm nozzle: Vase mode 0.7mm wall thickness…
Tired of receipts, dust, and other debris clouding your workspace? This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings. This print features a fully functioning built-in…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
EN Filament garbage can for the Bambu Lab A1. 1.1mm wall thickness. Printed with 0.6mm hotend. Layer height 0.42mm DE Filament Mülleimer für den Bambu Lab A1. 1,1mm Wandstärke. Gedruck mit 0,6mm Hotend. Schicht Höhe 0,42mm
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
My first original 3D print model - A trash can to sit next to my printer and home my failed prints and filament stringies. Recommend printing at 150% scale.
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Very simple and easily adjustable model of the Yggdrasil - a tree that grows through all nine worlds. Use a piece of double-sided tape to stick it onto a wall or other flat surface. The 3mf file included is for printing on the MK3S…
Brauchst du eine schnelle Übrraschung zu Ostern? - Dann bist du hier richtig. Ich habe insgesamt zwei Varianten als Druckprofil erstellt: mit Knickohr mit geraden Ohren Montage: Evtl. musst du die Aluminiumfolie ringsherum etwas glatt…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
Updated version of trash bag roll holder . Model uses less plastic, but still stiff. You can mount it anywhere in any position using double-sided scotch-tape or use screws. Available sizes: length: 12cm, 16cm, 20cm Diameter: 6cm WAF (Wife…
Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
Raspberry Pi Pico Case. Two versions, one with the pins facing up and one with the pins facing down (pictures only show pins facing up version right now). Make sure you download the correct files because the different versions are not…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
💥 Pokémon Beads for Every Fan! 💥 Bring your favorite Pokémon everywhere with this fun set of Pokémon-themed beads ! Designed to slide onto cords, laces, or keychains, these adorable prints feature: ✔ Starter Trio: Pikachu ⚡, Squirtle 💦,…
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
People copying my model from Thingiverse and making out it's their own design, so I've added it here on Printables…. This is the second version of this project with a "fancier" bin and also the bin part is larger than the original. Since…
Grass Block Twisty Fidget At first glance, it’s a familiar grass block; Then it moves. This design reimagines the iconic cube as a transforming mechanical object. With a smooth rotational motion, the compact block expands into a…
Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Medium Waste Bin Prints without support, perfect for your desk. Notes: All parts print without support.…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…
Thanks for checking out my work. If you like what I'm doing please give it a like and consider buying me a coffee ! For those in Australia without access to a 3D printer you can order the full 3D printed parts set from me here. Retro…
Raspberry Pi Case with voronoi snap fit lid printed with Geetech 30T
A quick printing case for the Raspberry Pi Zero 2 W The Zero 2 W is a great little workhorse but who wants a bare board sitting around? Cover it up with this minimal case. This case is primarily printed flat with fold lines designed in…
U will need: Case - M2.5x10 self tapping screws X7 Pi - M2.5x6-8 self tapping screws X4 Mounting to 3060 extrusion (30mm spacing) - M5x10 BHCS or SHCS X2 No supports are needed for this design. Red faces can be removed for wire/ribbon…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Yet another trash bag roll holder. You can mount it anywhere in any position using doblesided scotch-tape as well as screws. Choose your size and let's print! Available sizes: length: 8cm, 12cm, 16cm, 20cm Diam: 4.5cm, 5.5cm, 6cm, 6.5cm…
Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.
Trash Can with separate Lid or as a Solid Model Original design for the 2024 Christmas Community Print Drive . Two versions are included: Solid Model and Bottom/Lid version with two parts. My kids insisted that I create the design that…
This is a mini tripod for cameras. WHY? I wanted an small tripod that would be able to carry a DSLR in portrait and landscape mode. Many 3D printed tripods where either too small or not stable or didn't support portrait orientation. So I…
A sleek, functional enclosure designed for the Raspberry Pi 3 Model B / 3B+ . High-performance cooling meets a minimalist, screwless design. ✨ Highlights Toolless Assembly: Precision snap-fit mechanism. No screws needed. Active Cooling:…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm. Lid can be found here:…
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I really like pyrho's snap fit case, but my NVMe HAT wouldn't fit, so I decided to remix it. I remixed the original model to fit the 52pi N04 M.2 2280 PCIe To NVMe HAT specifically, but other HATs can fit in the case fine as long as you…
A case for the Pi Pico, Pico W, Pico 2, Pico 2 W. Supports soldered headers but does not support the official Pico 2 WH (see below for alternatives). Snaps together. Allows the BOOTSEL button to be pressed. Useful when the Pico needs to…
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
Printsettings: Layerhight: 0.2mm No Support Needed No Screws needed. New: New lids and cases for various uses. All variants can be combined with each other.
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
TLDR Raspberry pi camera mount for the voron 0 / voron 0.1 Get up close and personal with the nozzle & the print bed (>80% visible) Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws NO PRELOADING OF NUTS thank goodness! No…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . WARNING:…
