Raspberry Pi 5 + Pimoroni NVME Base Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of pyrho's Pi 5 case with support for the Pimoroni NVME Base added + Now with support for NVMe Base Duo
- Rating
- 4.893 / 5
- Likes
- 212
- Downloads
- 2,447
- Makes
- 32
- Views
- 12,545
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is…
Update: Added different bottom shell for NVMe Base Duo (long term usage not tested)
A Pimoroni NVMe Base Duo was kindly provided by RaspberryStore.nl , as a reference.
#HowTo Print
Place the halves of the case with their largest flat side facing towards the print-bed. The material is your choice. I simply used PLA. I used 0.15mm Layers but everything ≤0.2mm should work.
#HowTo Assemble
- Install the NVME Base to your Pi by following Pimoroni's installation-instructions (https://youtu.be/odG7FbptgWQ).
- Insert the assembly carefully into the bottom shell with the NVME-base facing down and the micro-SD-slot facing its designated opening.
- Snap fit the top and you are done! 🎉