Elgato Key Light Air extender
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.97 – €2.40 net (excluding VAT)
For file: rallonge lampe_0.2mm_PETG_MK3S_2h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.18 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.33 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Allow to tilt the Elgato Key Light Air when using Elgato M sized desk adapter
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 87
- Makes
- 1
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting.
This model allows to extend and then tilt the light more for good lighting
If the lamp slides, you can use silicon or ruber inside the ball to add friction and make it tighter
The model needs to be printed TWICE for a single lamp (design is symmetrical)
Printed in 2 parts out of Prusament PETG, requires 2 M6 bolt and nut to assemble (I've used M6x30)