Hardinge HLV Spindle Nose Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spindle Cap for Hardinge style lathes equipped with 4 deg. spindle nose.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 304
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to protect the spindle nose of Hardinge HLV Lathes. Fits Hardinge 4 deg. spindle taper.
This part is great if you typically use collets, but is easy to remove when it comes time to mount a chuck. It utilizes a brass tip set screw to interface with the bayonet groove in the spindle in the same way that a chuck would mount. This means you can install and remove the cover just like you would a chuck.
This design took nearly 10 iterations to get the spindle taper dimensions and bayonet key position dialed in perfectly. I hope you find this part useful and happy printing!
Hardware:
- MCM 90669A351 https://www.mcmaster.com/90669A351/
This part prints well with 0.1mm layer height, 4 walls, 25% infill, without supports, I recommend printing in ABS or PETG.
Enjoy!