Hardinge HLV Spindle Nose Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spindle Cap for Hardinge style lathes equipped with 4 deg. spindle nose.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to protect the spindle nose of Hardinge HLV Lathes. Fits Hardinge 4 deg. spindle taper.
This part is great if you typically use collets, but is easy to remove when it comes time to mount a chuck. It utilizes a brass tip set screw to interface with the bayonet groove in the spindle in the same way that a chuck would mount. This means you can install and remove the cover just like you would a chuck.
This design took nearly 10 iterations to get the spindle taper dimensions and bayonet key position dialed in perfectly. I hope you find this part useful and happy printing!
Hardware:
- MCM 90669A351 https://www.mcmaster.com/90669A351/
This part prints well with 0.1mm layer height, 4 walls, 25% infill, without supports, I recommend printing in ABS or PETG.
Enjoy!