Creality K1/K1 Max/K1C bed levelling risers/shims
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
0.1 to 1.2 mm shims to level the bed of your K1/K1 Max/K1C without destroying top level of the bed
- Rating
- 5 / 5
- Likes
- 482
- Downloads
- 5,569
- Makes
- 9
- Views
- 24,899
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
UPDATE: Added 1.1 and 1.2mm shims
UPDATE: New version with markings.
It doesn't require to destroy the top level of bed to install, like some modifications i've seen before.
It's designed, so you can put it from the side and rotate into place. The exception is the rear axle, which you have to unscrew all bed to put it in.
Before using the shims, i first used the official method which made it easier:
https://youtu.be/CsIAJgCAxFM?si=EWOVce5ODQWUXolF
I recommend leveling the back part first, and then proceeding with the front ones, since you have to unscrew all bed to put back one into place, but for the front ones you only need to unscrew the axle you are leveling.
EDIT: I discovered, that you can place back axis shim wouthout removing whole bed, by doing it from under the bed.
STEP for 0.1 to 1.2mm shims. I printed this with 0.1mm layer with PETG and later switched to PCTG. Any material will do, but i would avoid PLA since it has low temperature resitance.