1 / 12
Center Marking Gauge - Geared — image 1
1 / 12

Center Marking Gauge - Geared

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Geared center marking gauge for marking the center line on workpieces from 0 to 6.5 inches (165mm) thick.

Rating
5 / 5
Likes
60
Downloads
262
Makes
4
Views
789
Reviews
4

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Geared center marking gauge for marking the center line on workpieces from 0 to 6.5 inches (165mm) thick.

The centered notches allow for marking to the edges of your workpiece or use the hole in the center.  Just twist the handle to the sides and…uh. it's really kind of self-explanatory. 

Everything fits very tight, so you may want to make adjustments with the included step files or play with your horizontal expansion.

Assembly

  1. Place the racks into the “Case Bottom” and bring them to the very center, pinching them together.
  2. Insert the gear in between them. It'll twist slightly but should go in smoothly. 
    This will ensure that the fins are centered.
  3. Snap the lid onto the case…This is kind of hard. Give it some oomph. It's not meant to come apart after.
  4. The knob should be a nice friction fit on the top side. 
  5. Hit me up with questions.

Tags