8E0863727A VW Hood Insulation Pad Clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.35 net (excluding VAT)
For file: VW 8E0863727A_0.2mm_PETG_MK3S_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Copy of original part. Improved to hold insulation better + better removal.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 272
- Makes
- 3
- Views
- 712
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
About model
My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012).
Size: 25x20x17mm
Compatibility
VW carmakers brands
Modifications
I optimised original VW design like so:
- Clamp has better angle, which will hold insulation pressed onto hood.
- Both pads are fatter so removal is more comfy for your fingers
Print info
Its an easy print overall with supports.
| Material | PETG; but ASA recommended due to high temperatures |
| Layer | default (0,2 mm) |
| Supports | yes (set "snug" supports to save time) |
| Infill | 100% |
| Nozzle | default (0,4 mm) |
| Duration | ± 25 mins (Prusa MK3S - 100% speed) |
If you like my model…
…please click "like", and post a make. This will help me to win some prusameters, and help other makers decide if this is a useful model. Thanks.
