1 / 2
Kleenex Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wallmount to attach a kleenex facing down or to the side
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 64
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This is a simple wallmount designed to fit Kleenex boxes and 2-3 screws are used to attach it.
Note
- Designed for #6 wood screws, up to (7.25mm head, 3.3mm shaft, 80°)
- The internal dimensions are 230mm x 122mm x 95mm, designed to fit standard kleenex boxes with some extra space
- If you have spaghetti detection of some form, it tends not to like these large hex patterned models.
Printing Recommendations
- Can be printed without supports or brim
- Possible problems with stringing if your filament is wet
- Recommend using a heat gun to remove strings