Replacement Base for Articulating Arm Lamp/Magnifying/Microphone Table Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement base for Lamp/Magnifying Glass/Microphone articulating arm desk clamp.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I had purchased this base from Amazon https://www.amazon.com/YOUSHARES-Microphone-Adjustable-Interface-Cantilever/dp/B09L88CFBY when the table clamp base for my articulating arm magnifying glass broke. The injection molded base on this broke after a couple of months, but the metal clamp piece was solid so I wanted to print a replacement.
I printed this on a Prusa Mini in eSUN PLA, I ran it a little hotter than usual for better layer adhesion and ran it at 80% infill with 4 perimeters. The holes in it are for #10 socket head screws that are 1.5 inches long (would normally do these in metric, but that's what was in the junk drawer). The print might survive on it's own, I added the screws to help hold everything together.