Zero+ Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In the process of building my Micron+ I realized the Zero Filter which works with the original (120x120) Micron does…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
In the process of building my Micron+ I realized the Zero Filter which works with the original (120x120) Micron does not fit the Micron+ with a 180x180 bed. So I took inspiration from the printed parts in front of me and made this.
Zero Filter - https://github.com/zruncho3d/zerofilter
Requires (2) M4 washers at each of the bed mounting points to raise the bed. I also had to shift the brash bushing in my Z Endstop housing as far up as it could go while still being seated properly to get the Z endstop slightly above the bed level.
Solidworks file included if you wish to modify. I apologize but I havent taught myself assemblies yet purely out of laziness so, all parts were design in one Solidworks part file.
Category: 3D Printer Accessories