1 / 3
Chevy Flames Lightbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Chevy Flames lightbox I used 1.04 Flow rate. Took a few tries to get it down. This is definitely the hardest I've done so far. The hardest part is getting the lights inside the flames tips if you have the patience, it will look awesome. Printed in 2 pieces i did not have to glue this one together its a tight fit. I used 15% Gyroid Infill, 4 top shell layers, and slowed the outer wall speed to 85mm/s and inner wall speed to 200mm/s.